Home > No Sound > No Sound Or Printer

No Sound Or Printer

If sound problems continue, check the speaker connections. If the BIOS has an On-board Audio setting available, the On-board Audio setting in the BIOS should be Disabled. There are 1,000's of posts about that app so I'll leave one link.http://en.community.dell.com/support-forums/laptop/f/3517/t/19447327 Flag Permalink This was helpful (0) Collapse - Clarification Request Need more about the printer. To prevent damage to the speakers and to prevent fuses from blowing in the future, keep the following items in mind when using the computer: Turn off the speaker volume control this contact form

If sound is heard correctly from each speaker, you are finished. Click 'Run' ('Save' in Firefox) 3. This works for any software installation that uses the Windows Installer software, which is quite commonly used these days.Install the software again. Click 'Run' Again 4. http://support.hp.com/ie-en/document/c01884922

The red circle on the speaker icon disappears when sound is no longer muted. If any of these volume controls are muted or set too low, the entire sound experience is affected. When done, test again for sound using the same steps as above with the volume control slider.

You can do this manually using the free Drivers Scan above to check for the missing or outdated Drivers and then searching for, downloading and installing the Drivers yourself. I plugged in my webcam, doubleclicked it in MyComputer, and it says "Creation of Video Preview Failed..please check device etc"What could have happened?I always say it's best to doublecheck. The Device Manager window opens. Before considering other options, check through all the items listed, they may seem obvious but more often than not, the problem is something very simple and very easily overlooked.

Modify your browser's settings to allow Javascript to execute. In the search results, click Sound under the Programs list. Now I find I can't print anything! https://www.cnet.com/forums/discussions/windows-10-no-sound-or-printing/ Figure : Volume Mixer Make sure the volume is not muted by looking at the square Mute buttons below the volume slider.

Step 11: Using the correct headphones The correct headphones must be used to get sound from the computer. For more information, see Testing Hardware Using HP Support Assistant and Vision Diagnostics (Windows 7). Figure : Volume and menu buttons on a monitor (your monitor might be different) Click Start , and then click Control Panel. Figure : Checking for audio problems Select the audio connection device you want to troubleshoot, such as speakers.

The connectors are marked with symbols next them. check over here A bit clueless0Installation of Wireless Printer Canon Pixma MG54500How to install a Canon PIXMA MG3520 Wireless printer0Is Canon PIXMA iP2870 plug and play if libgutenprint2 and printer-driver-gutenprint is already installed on Headphones: similar to speakers, the wiring on headphones is probably the most vulnerable part, particularly near the earpiece. Step 7: Updating the audio driver An updated audio driver might resolve the problem if the computer is experiencing sound problems after upgrading the operating system to Windows7, or the computer

Thank you for helping us maintain CNET's great community. weblink Figure : Available updates Test for sound after updating the audio driver. Under Sound, click Adjust system volume. Select Yes or OK to save the defaults by pressing the Enter key.

To fix this sound issue you will need to find the relevant Sound Drivers and reinstall them. Play a sound. Username Forum Password I've forgotten my password Remember me This is not recommended for shared computers Sign in anonymously Don't add me to the active users list Privacy Policy

ERROR http://photoshoprockstars.com/no-sound/no-sound-when-playing-dvd.html To enter the BIOS, turn on the computer and when the first logo screen displays, press the F10 key repeatedly until a BIOS Setup screen opens.

Do the following, depending on what displays: If a sound device is not listed and the computer uses a sound card, reseat the sound card into the motherboard slot. To test, click the volume slider bar. Figure : Recovery Manager Click Hardware Driver Reinstallation.

Lots of sound occurring at one peak level stresses the speakers.

Ask the community! E.g. Right-click the sound device name and select Enable to re-enable the device. SL SR (gray), is for Side Left and Side Right speakers Make sure each speaker cable is connected to its corresponding connector on the back of the computer.

To enter the BIOS, turn on the computer and begin pressing the F10 key repeatedly until a BIOS Setup screen opens. If you are using headphones and having ‘no sound' issue: Audio plug headphones - Firstly, ensure that your wired headphones are plugged into the correct audio jack. Error codes can be extremely frustrating if you are unable to understand what they mean and how to deal with them. his comment is here If there is no sound coming from the speaker, not even a humming noise, remove and replace the fuse.

Does this answer your problem? Delete the sound card then Windows will automatically detect the sound c ard and then select search the internet for drivers. Please re-enable javascript to access full functionality. Step 4: Checking speaker connections Use these steps to make sure you have the speaker cables connected to the correct sound connectors.

Disruptive posting: Flaming or offending other usersIllegal activities: Promote cracked software, or other illegal contentOffensive: Sexually explicit or offensive languageSpam: Advertisements or commercial links Submit report Cancel report Track this discussion