Home > Windows Xp > Windows XP Home And 200GB Hard Drive Problem

Windows XP Home And 200GB Hard Drive Problem

The problem is that I had installed an original release of Hauppauge Nova T 500 dual (English Freeview) digital tv card which is based on USB chipset for some strange reason. Thanks for the link to the site. Now I am finally understanding that I had still used a size that was beyond my BIOS limit. I installed GRUB as well, thinking that this might help diagnose the problem. have a peek here

When I try to boot into XP, it shows the "rootnoverify" and "chainloader" lines on the screen, and then nothing more.Here's a list of things that I've tried, in no particular Related Resources XP Won\'t Boot WIth Large Hard Drive Dell inspiron 6000 won't boot from XP CD with large drive Dell inspiron 6000 won't boot from XP CD with large drive Fortunately I always had my 80GB drive to go back to. If the hard drive is still OK then it should show up fine. http://www.pcadvisor.co.uk/forum/helproom-1/sata-hard-drive-problems-windows-xp-home-edition-148535/

I found this wonderful thread after the fourth question! Can I replace it with a Seagate Momentus 7200.2 ST9200420AS 200GB 7200 RPM, which is SATA? Once it loads, you should see an "Initialize Disk" wizard pop up. NIce to see some floridians.

After that your booting will be unpredictable, up to and including not being able to boot.There are two workarounds. Booting from the old drive allows recognition of the new drive no problem, just can't boot from the new one. When I go into setup, in my case by pressing F2 my new 320GB Western Digital hard drive is reported by the BIOS as 137GB. I have not had programs disappear doing this.

I formated the drive and then deleted the visible contents. Plus, booting into your Windows OS from media like CD's, floppies, etc., if you do that, will be very complicated or impossible unless you have made the media yourself to include for a reasonable fee... website here Currently I have all my files backed up to it.

Good thing my files are on a different drive. I did need to explore a little after using the wizard to find I had to right click on the new driver in the manager window to start the formating process How do i clone the 40gig drive onto the 250gig without formatting the 250gig. So I replaced the new drive with the old 80GB drive and the machine booted flawlessly.

Cheers! into 29 gb, and then another partition with the rest of the drive 124 gb. The only issue I encountered was when my external USB drive exceeded the output DC capacity of one laptop (so I put its drive in a different laptop to do the All rights reserved Dell Systems Dimension 2400 Series BIOS version A05 http://www.Dell.com Keyboard failure Sil 3114 SATARaid BIOS Version 5.0.39 Copyright (c) 1997-2004 Silicon Image, Inc.

by youshine / April 24, 2010 12:17 PM PDT In reply to: Oh my god, it just happened to me too! navigate here As I start using the PC, the free space on C partition keeps reducing. The new drive is IDE, as this seems to have been the last Inspiron made without SATA. D+ Reply Stefen Kaur says: November 11, 2008 at 12:50 pm I have a question.

thanks, Spiv Reply israel says: March 3, 2008 at 12:59 am ------HELP PLEASE----- i am putting a unpartioned hard drive in my computer as my slave hard drive. I only had to format the new drive. I opened up the case, following your instructions. Check This Out Does anyone know how the Vista Disk Cleanup works in the background?

I was told by this helping forum poster that this problem I experienced only happens with the original release of Hauppauge Nova T 500 and since Hauppauge solved this by a I built that with the same 133GB size and all was fine from September 2009 till Aug 15, 2010, this past Sunday. The frequency of creating SR points by Windows is reduced to once a month.I run Zone Alarm Internet Security (Firewall + Anti-virus + Anti-spyware).

Anyway the next morning I powered up to do a BACKUP.

To use the new drive as a second drive, the primary partition option should still be selected, otherwise, Windows will not format the drive. This is curious to me as I didn't find much info about this at the time it happened to me but I wonder if it's something other XP users are having I had a dual boot windows XP/Linux 160GB drive that worked fine that I upgraded to a 250GB drive with a 180GB XP partition. This whole thing is a farce.

all the while my processor was crunching away non-stop even after a fresh reboot and nothing running. The IDE ribbon comes off of optical drive. The secondary drive should be set to slave if it's on the same cable. this contact form I partitioned the remainder of the drive that pops up as Drive E.

What I have not done yet is "Enable Big LBA". I have been living fine without the Dell hidden partition. I tried using my xp cd to repair it…. Track this discussion and email me when there are updates If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and

Remove all unwanted programs/software using the Add/Remove option in the Control Panel, or the software's own Uninstall option. The operating system must be installed on the first partition that is less than or equal to 137 GB and the rest of the hard disk divided into one or more Still the same. You'll need to backup and restore your data to your new hard drive.